Sunlu PLA+ 2.0 3D Printer Filament 1.75mm, Yellow
13.10 €
Kaubakood: 176224
Tarnija laos olemas
Tellimiseks saadaval: 10+ tk
Ooteaeg: 5–12 tööpäeva
Tarnevõimalused – tarneriik:
Eesti
Tarne pakiautomaati
Eeldatav: 25.11.–04.12.
alates 2.90 €
Kulleriga kohaletoimetamine
Eeldatav: 25.11.–04.12.
alates 9.90 €
Sunlu PLA+ 2.0 is a 3D printing filament designed for FDM 3D printers, providing consistent material feed and stable printing performance.
Key Features
- Filament Diameter: 1.75 mm with a tolerance of ±0.02 mm.
- High-Speed Support: supports printing speeds up to 300 mm/s.
- Enhanced Flow: up to 1.5 times higher flow than standard PLA.
- Broad Compatibility: works with SUNLU devices and FDM 3D printers from other brands.
| Manufacturer | Sunlu |
|---|---|
| Model | PLA+ 2.0 Y |
| Color | Yellow |
| Diameter | 1.75 mm |
| Tolerance | ±0.02 mm |
| Density | 1.21 g/cm³ |
| Melting temperature | 164 °C |
| Vicat softening temperature | 54 °C |
| Heat deflection temperature (HDT) | 53.8 °C |
| Melt flow rate | 7.8 g/10 min |
| Tensile strength | 53.4 MPa |
| Elongation at break | 20.3 % |
| Flexural strength | 81.8 MPa |
| Flexural modulus | 2740 MPa |
| IZOD notched impact strength | 19.8 kJ/m² |
| EAN | 6933582314736 |
|---|
What is the diameter and tolerance of this filament?
Sunlu PLA+ 2.0 filament has a 1.75 mm diameter with a tolerance of ±0.02 mm.
What is the supported printing speed?
The filament supports printing speeds of up to 300 mm/s.
Which 3D printers are compatible with this filament?
It is compatible with SUNLU FDM 3D printers, accessories, dryers, and FDM 3D printers from other manufacturers.
Arvamused
Sellel tootel pole veel arvamusiArvamuse saavad jätta ainult ostjad pärast ostu.
Gudri pirkumi vienuviet
