Solar Charge Controller 60A 12V/24V PWM with LCD and 2x USB
-9%
Kaup ei ole praegu laos
The 60A PWM solar charge controller is designed for 12V and 24V photovoltaic installations with automatic voltage detection. It controls battery charging from solar panels to help protect the battery and extend its operational life.
Key Features
- Automatic 12V / 24V system voltage detection
- Maximum charge and discharge current of 60A
- Readable LCD screen for monitoring voltage, battery level, and load status
- Two 5V (2.5–3A) USB ports for mobile device charging
- Multi-stage PWM charging with automatic temperature compensation
- Compatible with AGM, GEL, and lead-acid batteries
- Protection against overcharging, over-discharging, overload, short circuit, and reverse polarity
| Type | PWM solar charge controller |
|---|---|
| System voltage | 12V / 24V (auto detection) |
| Max charge current | 60A |
| Max discharge current | 60A |
| Max panel power (12V) | 780W |
| Max panel power (24V) | 1560W |
| Max panel voltage (12V) | 23V |
| Max panel voltage (24V) | 46V |
| Display | LCD |
| USB ports | 2x USB 5V / 2.5–3A |
| Supported batteries | AGM, GEL, lead-acid |
| Load disconnect voltage | approx. 11.1V / 22.2V |
| Reconnect voltage | approx. 12.6V / 25.2V |
| Overcharge protection voltage | approx. 14.4V / 28.8V |
| Self-consumption | < 10 mA |
| Operating temperature | -35°C to +60°C |
| Condition | New |
| EAN | 5907621863388 |
|---|
Which battery chemistries are supported by this controller?
This controller supports AGM, GEL, and standard lead-acid batteries in 12V and 24V configurations.
What is the maximum solar panel wattage allowed?
The maximum input is 780W for 12V battery systems and 1560W for 24V battery systems.
What information does the LCD screen display?
The LCD shows battery voltage, a graphical charge level indicator, charge status, LOAD output status, solar panel operation information, and operating mode.
Gudri pirkumi vienuviet
