Sunlu PLA+ Silk 3D Printer Filament, Black
14.60 €
Kaubakood: 176461
Tarnija laos olemas
Tellimiseks saadaval: 10+ tk
Ooteaeg: 5–12 tööpäeva
Tarnevõimalused – tarneriik:
Eesti
Tarne pakiautomaati
Eeldatav: 13.11.–24.11.
alates 2.90 €
Kulleriga kohaletoimetamine
Eeldatav: 13.11.–24.11.
9.90 €
Sunlu PLA+ Silk is a black 3D printing filament designed to provide a glossy, silky surface finish for artistic and decorative models without additional polishing.
Key Features
- Glossy silk finish for an elegant appearance
- Dimensional accuracy of ±0.02 mm and uniform diameter
- Low shrinkage and minimal warping during printing
- Does not require a heated print bed
- Broad compatibility with FDM 3D printers like Bambu Lab, Creality, Prusa, and Anycubic
| Manufacturer | Sunlu |
|---|---|
| Model | PLA+ Silk B |
| Color | Black |
| Density | 1.25 g/cm³ |
| Dimensional accuracy | ±0.02 mm |
| Melting temperature | 164 °C |
| Vicat softening temperature | 54 °C |
| Heat deflection temperature | 53 °C |
| Melt flow rate | 9 g/10 min |
| Tensile strength | 60.6 MPa |
| Elongation at break | 6.3% |
| Flexural strength | 65 MPa |
| Flexural modulus | 2760 MPa |
| Impact strength | 4.2 kJ/m² |
| EAN | 6933582315870 |
|---|
Which 3D printers are compatible with this filament?
Sunlu PLA+ Silk is compatible with most FDM 3D printers, including machines from Bambu Lab, Creality, Prusa, and Anycubic.
Does this filament require a heated bed?
No, Sunlu PLA+ Silk does not require a heated bed for printing.
Gudri pirkumi vienuviet
