Sunlu PLA+ 2.0 3D Printer Filament, 1.75 mm, Grass Green
12.20 €
Kaubakood: 176236
Tarnija laos olemas
Tellimiseks saadaval: 10+ tk
Ooteaeg: 5–12 tööpäeva
Tarnevõimalused – tarneriik:
Eesti
Tarne pakiautomaati
Eeldatav: 13.11.–24.11.
alates 2.90 €
Kulleriga kohaletoimetamine
Eeldatav: 13.11.–24.11.
9.90 €
Sunlu PLA+ 2.0 is a durable 1.75 mm 3D printing filament engineered for smooth extrusion, reduced warping, and crack-resistant finished prints.
Key Features
- Printing speeds supported up to 300 mm/s
- Up to 1.5 times higher flow rate compared to standard PLA
- 1.75 mm diameter with ±0.02 mm tolerance
- Broad compatibility with FDM 3D printers
| Manufacturer | Sunlu |
|---|---|
| Model | PLA+ 2.0 GG |
| Color | Grass green |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mm |
| Maximum printing speed | 300 mm/s |
| Density | 1.21 g/cm³ |
| Melting temperature | 164 °C |
| Vicat softening temperature | 54 °C |
| Heat deflection temperature (HDT) | 53.8 °C |
| Melt flow rate | 7.8 g/10 min |
| Tensile strength | 53.4 MPa |
| Elongation at break | 20.3 % |
| Flexural strength | 81.8 MPa |
| Flexural modulus | 2740 MPa |
| IZOD notched impact strength | 19.8 kJ/m² |
| EAN | 6933582314965 |
|---|
What is the filament diameter and tolerance?
The filament has a diameter of 1.75 mm with a dimensional tolerance of ±0.02 mm.
What is the maximum supported printing speed?
The material supports printing speeds of up to 300 mm/s.
Which 3D printers are compatible with this filament?
It is compatible with SUNLU FDM 3D printers and virtually all FDM 3D printers from other manufacturers.
Gudri pirkumi vienuviet
