Sunlu PLA Glow W-Blu 3D Printer Filament, 1.75 mm, 1 kg, Glow-in-the-Dark, White and Blue

Sunlu PLA Glow W-Blu 3D Printer Filament, 1.75 mm, 1 kg, Glow-in-the-Dark, White and Blue — Pilt 3

Sunlu PLA Glow W-Blu 3D Printer Filament, 1.75 mm, 1 kg, Glow-in-the-Dark, White and Blue — Pilt 4

Sunlu PLA Glow W-Blu 3D Printer Filament, 1.75 mm, 1 kg, Glow-in-the-Dark, White and Blue — Pilt 5

20.30 €

Kaubakood: 196671

Tarnija laos olemas Tellimiseks saadaval: 10+ tk Ooteaeg: 5–12 tööpäeva

Tarnevõimalused – tarneriik:

Eesti

Tarne pakiautomaati Eeldatav: 13.11.–24.11.

alates 2.90 €

Kulleriga kohaletoimetamine Eeldatav: 13.11.–24.11.

9.90 €

Sunlu PLA Glow W-Blu is a glow-in-the-dark 3D printing filament in white and blue, containing phosphorescent components that emit light after absorbing illumination.

Key Features and Performance

The glow effect increases in intensity after exposure to UV light, making this material suitable for decorative models, gadgets, and accents visible in the dark.

Printing Temperature: 200–210°C with recommended printing speeds of 50–100 mm/s.
Bed Temperature: 50–65°C without adhesive, or unheated with an adhesive layer.
Packaging: Dried for 24 hours prior to packaging and vacuum-sealed with desiccant.
Printer Compatibility: Compatible with standard FDM 3D printers.

Manufacturer	Sunlu
Model	PLA Glow W-Blu
Color	White-blue
Filament diameter	1.75/3.0 mm
Tolerance	±0.02 mm
Printing temperature	200–210°C
Bed temperature	No heating: cover with adhesive / Heating 50–65°C: do not cover with adhesive
Tensile strength (kgf)	11–16 (factory standard at 23°C, wire diameter 1.75 mm)
Melting index	7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018)
Elongation at break	4% (in-house standard at 23°C, wire diameter 1.75 mm)
Melting temperature	165–180°C
Heat deflection temperature	55°C
Density g/cm³	1.24
Water absorption	0.5%
Recommended printing speed	50–100 mm/s
Bubbles	100% bubble-free
Weight	1 kg/roll
Length	1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

EAN	6933582315764

How does the glow-in-the-dark effect work?

The material contains phosphorescent components that absorb ambient light and emit a glow in darkness. Exposure to UV light further intensifies the glow.

What are the recommended temperature settings?

The recommended nozzle printing temperature is 200–210°C. The print bed can be heated to 50–65°C without adhesive or used unheated with adhesive applied.