Sunlu Filament Dryer for Bambu Lab AMS
-3%
120.00 €116.50 €
Kaubakood: 176760
Tarnija laos olemas
Tellimiseks saadaval: 10+ tk
Ooteaeg: 5–12 tööpäeva
Tarnevõimalused – tarneriik:
Eesti
Tarne pakiautomaati
Eeldatav: 12.11.–23.11.
Tasuta
Kulleriga kohaletoimetamine
Eeldatav: 12.11.–23.11.
11.90 €
The SUNLU AMS Heater is a smart filament dryer designed as an upgrade for the Bambu Lab AMS (Generation 1) system. It enables simultaneous material drying and 3D printing without separate pre-processing.
Key Features
- Simultaneous drying and 3D printing support
- Fast PTC heating up to 70°C in approximately 20 minutes
- Targeted air circulation system for even drying
- Intelligent real-time humidity monitoring and control (rH mode)
- Direct compatibility with Bambu Lab AMS Generation 1
- Quick and simple installation process
| Manufacturer | Sunlu |
|---|---|
| Model | Heater for AMS Bambu Lab |
| Product dimensions | 363 × 278 × 131 mm |
| Package dimensions | 415 × 316 × 190 mm |
| Net weight | 1.7 kg |
| Temperature range | 35–70°C |
| Heating time to 70°C | approx. 20 minutes |
| Time setting range | 0–99 h |
| Humidity display range | 10–90% RH |
| Maximum power | 390 W |
| Rated power | 220 W |
| Standby power consumption | 0.6 W |
| Power supply | AC 110 V / 60 Hz or AC 220 V / 50 Hz |
| Maximum current | 2.2 A (230 V) / 4.15 A (120 V) |
| Heating system | PTC + dual air circulation |
| Humidity control | Automatic (starts above 50%, stops below 20%, adjustable between 25–50%) |
| Compatibility | Bambu Lab AMS Generation 1 |
| Function | Drying during printing |
| EAN | 6933582322243 |
|---|
What is included in the package?
The package includes the SUNLU AMS Heater module, mounting hinges, mounting screws, an Allen wrench, a power cord, and a user manual.
Which AMS version is supported?
The dryer is designed specifically for Bambu Lab AMS Generation 1.
Gudri pirkumi vienuviet
